⎝⎛博狗体育中文⎞⎠

[List of Spinning Roller Regrind Cycles]
共阅[157]次 Release date: [2019/12/14] read a total of [157] times

The grinding cycle of roving and spun rubber rollers is mainly determined according to the hardness, usage time and output of roving and spinning rubber rollers. The hardness of different rubber rollers is different, and the life of rubber rollers with the same hardness is different. (See table below).


5df2d965cc7b5.png


In addition, the gap between the roller cores can be adjusted to the rear drive.


If the gap between the front rubber roller bearings is too large, the effect on the strip CV value is between 0.1% and 0.6%; if the gap between the rear or middle rubber roller bearings is too large, the The impact is between 0.01% and 0.1%. Therefore, when the rubber roller bearing gap is large, it is generally used for the rear rubber roller. Because the running speed of the rear rubber roller is low, the influence is small, and the influence on the spinning quality is particularly small.


丙纶纺丝机 、丙纶中强纺丝设备、丙纶高强纺丝设备、丙纶FDY纺丝机、涤纶纺丝机、芳纶1414纤维纺丝设备、DHP419系列高强丙纶纺丝牵伸机、 丙纶纺丝机 、DHP418系列丙纶纺丝牵伸机、DHkv1235-12型涤纶纺丝机、DHPE型高强高模聚乙烯纤维纺丝设备、DHTA型芳纶1414纤维纺丝设备、HDZF3型高真空动态干燥-固相增黏一体机、 丙纶纺丝机 Jiangxi Donghua Machinery Co., Ltd. specializes in the production of polypropylene spinning machines , polypropylene medium-strength spinning equipment, polypropylene high-strength spinning equipment, polypropylene FDY spinning machines, polyester spinning machines, aramid 1414 fiber spinning equipment, DHP419 series high-strength polypropylene Spinning and drawing machine, polypropylene spinning machine , DHP418 series polypropylene spinning and drawing machine, DHkv1235-12 polyester spinning machine, DHPE high strength and high modulus polyethylene fiber spinning equipment, DHTA type aramid 1414 fiber spinning equipment, HDZF3 Type high-vacuum dynamic drying-solid-phase thickening integrated machine, polypropylene spinning machine .

Related Keywords:
Tel: 0794--8242535 Fax: 0794—8247560 E-mail: dh@yadougu.com Address: No. 398 Yuanheng Second Road, Industrial Development Zone, Fuzhou City, Jiangxi Province
Copyright Jiangxi Donghua Machinery Co., Ltd. Technical support: China Polypropylene Network Gan ICP No. 08100647-1
If the articles, pictures or fonts published on this website are infringing, please contact the website owner immediately to delete them. Contact person: Miss Xue 138 6101 6292, Miss Fu 153 1256 7839
天天电玩城 龙博线上娱乐 七乐彩 欢乐拼三张